Is Plug-In Solar Legal in Washington DC?
No Washington DC law prohibits plug-in solar or sets rules for it either, which leaves it unregulated rather than banned. In practice that means you could get a system with backfeed protection, so it cannot send power back to the grid. Otherwise your utility can prohibit it. A bill that would set rules has been introduced and is waiting on a committee.
Washington DC Plug-In Solar Legislation: Where It Stands
How far plug-in solar legislation has got in Washington DC, and what that leaves you with today.
Where B26-0602 Stands in Washington DC
GRID Act introduced to let renters use balcony solar without utility approval.
B26-0602, the Guiding Renewable Interconnection and Distribution (GRID) Amendment Act of 2026, was introduced by Councilmember Charles Allen (Ward 6) on February 24, 2026, and referred to the Committee on Transportation and the Environment. A public hearing was held on March 26, 2026, and the bill now awaits committee markup. The bill speeds up the process Pepco follows to connect new solar panels to DC's electric grid and specifically exempts portable balcony solar from utility approval requirements.
Last updated April 2026. Legislation data sourced from LegiScan (CC BY 4.0) and other public sources.
What to Do While Washington DC Has No Plug-In Solar Law
- ℹInstalling a backfeed protection device is the safe course in an unregulated state, so the system cannot send power back to the utility.
- ℹAsk your utility what its rules say about a small system that plugs into an outlet. With no state law on the question, the answer in Washington DC comes from your utility rather than from the legislature, and it can differ between two utilities in the same state.
- ℹRead your lease, HOA rules, or condo documents first. Washington DC has passed nothing that overrides them, so a landlord or an association can still say no.
- ℹSize the system to what the home draws during daylight. Nothing here earns a credit for power sent back to the grid, so the savings come from what you use as you generate it.
The fastest way to change any of this is to tell your own legislators that you want it changed. The message below is written for where B26-0602 actually is in the process, so it asks for the next step rather than a general show of support.
Solar Payback Calculator
Estimate how long a plug-in solar system takes to pay for itself in Washington DC, at the average Washington DC electricity rate. Enter your ZIP code to get started.
See your solar savings
Enter your ZIP code to calculate personalized payback estimates based on local solar data and electricity rates.
The links below are affiliate links for EcoFlow, APsystems, Current Connected, and Amazon. I earn a commission at no extra cost to you, which helps support the site. As an Amazon Associate I earn from qualifying purchases.
Recommended Products
Plug-in solar products that ship to Washington DC. Washington DC has set no rules of its own, so use backfeed protection and check with your utility before installing one of these.
EZ1-LV Plug-In Microinverter
Purpose-built plug-in solar. No complexity. Just works.
Skip the complexity of multi-input systems. EZ1-LV is designed to do one thing really well—efficiently power two panels with true dual MPPT and a clean plug-and-play setup. No oversizing, no guesswork—just reliable performance you can plug into your home outlet and start using right away. Built-in Wi-Fi and Bluetooth make setup and monitoring simple, with no installer required.
Buy NowAvailable in: US · UL 1741
Callsun 200W Bifacial Solar Panel (2-Pack)
Pairs with the EcoFlow STREAM series
A 2-pack of 200W N-type bifacial panels. Pairs with the EcoFlow STREAM Microinverter or STREAM Ultra. Each panel fits cleanly into one of the inverter's PV inputs, with room to add more panels as your setup grows. The APsystems EZ1-LV is designed for larger panels (315W and up), so for that inverter see the Callsun 450W panel.
Buy NowAvailable in: US
Callsun 450W Bifacial Solar Panel (2-Pack)
Pairs with the APsystems EZ1-LV
A 2-pack of 450W N-type bifacial panels. One panel goes to each input on the APsystems EZ1-LV, using both of its independent MPPT channels for a 900W array that matches the inverter's 900W output. These panels are not compatible with the EcoFlow STREAM Microinverter or the STREAM Ultra. Both of those inverters cap each input at 14A, and this panel puts out 14.97A at its maximum power point, so it exceeds the rated input current. Check your mounting surface before ordering: each panel is 69.4 x 44.7 inches and weighs 54 lbs.
Buy NowAvailable in: US
IntegraRack IR-30 Ground Mount Frame
Durable ground mount for a yard array
A durable ground mount for anyone with yard space to spare. The aluminum frame sets a panel at a fixed 30° tilt, the right angle almost anywhere in the contiguous US, and stands up to serious wind and snow once anchored. No rails, augers, or concrete footings, and each frame goes together in about two minutes. The price is per frame, and you need one per panel plus one extra to start each row, so a two panel array takes three.
Buy NowAvailable in: US
Want to see where plug-in solar stands in other states? View the interactive map, compare the laws that passed, or browse advocacy resources.
This page summarizes the plug-in solar legislation tracked for Washington DC for general information and is not legal advice. Verify details with your utility and your state legislature before installing.